1. The cross section foresights at one station along a proposed highway are shown below. TheHI for these foresights is 970.61 ft. Plot the cross section elevation to scale.5.2 4.8 6.6 5.9 7.0 8.124 + 0050 22 0 12 30 502. The roadway subgrade elevation is 973.30 ft., the planned roadbed is 30-feet wide, with sideslopes of 2%:1. Plot the roadbed design elevations on the plot from problem 1, and find theslope intercepts and the cross section area.3. The cross section foresights for the next station are show below. They were observed fromthe same instrument setup as in problem 1. The subgrade elevation is 972.30 ft. Use the sameroadbed width and side slopes from problem 2. Plot the cross section and the roadbedelevations to scale, find the slope intercepts, and find the cross section area.4.825 + 003.2 5.350 0 504. What is the volume of soil to be removed or added between stations 24 and 25?Hint: To calculate volume of soil between stations 24+00 and 25+00Use the following formula:V = (100ft)[A24+00 + A25+00]

Hello student, As per your request I solved problem 2 based on data obtained from problem 1 we have…

1. The cross section foresights at one station along a proposed highway are shown below. The HI for these foresights is 970.61 ft. Plot the cross section elevation to scale. 5.2 4.8 6.6 59 7.0 8.1 24 + 00 50 22 0 12 30 50 2. The roadway subgrade elevation is 973.30 ft., the planned roadbed is 30-feet wide, with side slopes of 2%:1. Plot the roadbed design elevations on the plot from problem 1, and find the slope intercepts and the cross section area.

1. The cross section foresights at one station along a proposed highway are shown below. The HI for these foresights is 970.61 ft. Plot the cross section elevation to scale. 5.2 4.8 6.6 59 7.0 8.1 24 + 00 50 22 0 12 30 50 2. The roadway subgrade elevation is 973.30 ft., the planned roadbed is 30-feet wide, with side slopes of 2%:1. Plot the roadbed design elevations on the plot from problem 1, and find the slope intercepts and the cross section area.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

H.W\ Calculate the excavation volume from the details of cross sections shown in table below. The width of the road is 12m Stations Cross-sections 60+40 C1.62 C2.07 C1.75 C2.01 C2.46 6.93 4.5 4.5 8.19 60+90 C2.24 C2.24 C2.24 9.36 9.36 70+55 C2.13 C2.03 C1.92 9.2 0. 8.88
5. An engineer is planning to use gabion retaining wall to protect a section of Kennon road from landslide. A gabion is a wire mesh container filled with rocks. The engineer must estimate the volume of the rock to be used. If the gabion wall will have a thickness of 5ft, estimate the volume of the rocks given the measured depth of the wall every 10 ft of its width based from the road level. width, ft 10 20 30 40 50 60 70 80 90 depth, ft 5 12 20 18 17 13 10 5 a.) estimate the area of the wall using multiple trapezoidal rule with n=9 b.) estimate the area of the wall using single application of Simpson's 3/8 rule c.) estimate the volume of the rocks to be used using the area in a.) and b.)
Find the mobility, the Grashof condition, and the Barker classification of the following oil field pump. 76 51.26 47.5 80 12
The following data was collected in a road project: Free haul distance = 50 meters Cost of borrow= 5 pesos per GYm Cost of haul = 0.25 pesos per meter station • Stationing of one limit of free haul = 2+763.12 Stationing of one limit of economic haul = 2+948.03 Assume the ground surface has a uniform slope from cut to fill. STATION AREA CUT FILL 2+440 51 2+740 BALANCING POINT 3+040 69 Compute the length of economic haul. b. Compute the overhaul volume. a. C. Compute the volume of borrow. d. Compute of the volume of waste.
YouTube Mall Over... Leeds International... M1 Questions by To... Question Completion Status: QUESTION 2 A car of mass 750 kg moves along a stretch of road which can be modelled as a line of greatest slope of a plane inclined to the horizontal at 30°. As the car moves up the roa for 500 m its speed reduces from 20 ms-¹ to 15 ms-¹. Calculate: a the loss of kinetic energy of the car 65,625) 66,625 67,625) O 68,625)
The left and right water edges of a river are 2.75m and 62.45m, respectively, from an initial reference point. Verticals are located at distances 11.25, 19.25 26.75, 34.45, 40.95, 46.95, and 54.45 m, respectively from the reference point. The corresponding depths of verticals are 5.00, 9.60, 9.80, 10.00, 10.40, 10.00, and 4.80m. Mean velocities in the verticals are 0.16, 0.60, 0.75, 0.92, 0.97, 0.98, and 0.65 m/s respectively. A. Determine the Total Discharge of the river. B. Determine the average velocity of the river flow.
Sketch the Isometric and three view and mention the dimensions Also draw the hidden lines, use creo parametic to sketch the figures 3.00 4.50 1.50 1.25 A -.25 4.00 Ø.78 3.00 .25 - .78- .40 A (BOTTOM) 4.50 2.25 4.50 1.00 МATL—AISI С-+1040 Step bracket.
7.8. Training questions. 1. A river 80 meters wide, with a depth d at a distance x measured from one of its banks is given by the following table. x0 10 20 30 40 50 60 70 80 d 4 7 9. 12 15 14 8 3 By Simpson's rule, find the cross -sectional area of the river.
The wind data of a site is listed below. The data summarizes the wind speeds and their respective frequencies at the hub height of the turbine described below: Parameters: Turbine rotor diameter: 70.0 m Overall efficiency: 33% 3 Site air density 1.16 kg/m generator disengaged for the input values below 30% of the rated power Generator cutoff low speeds: High speeds: load dumping up to 3 times the rated power Determine a generator size that maximizes the annual energy output. Consider generator ratings in increments of 25 kW. Express the final answer in kWh.
Q4 a) Determine the wind speed at a height of 40m over surface terrain with a few trees, if the wind speed at a height of 10m is known to be 5 m/s. For your estimate use two different wind speed estimation methods. b) Using the same methods as part (a), determine the wind speed at 40m if the trees were all removed from the terrain.
Draw the top, bottom, left, right, back and front view, Dimension and include a title block. The scale is % to 0.582 776 dia counter bore 588 deep 402 dia through hole AN 2renion ne Teth 0. Seis 6niy one 6.8 3-1 5.2 4.515 433 6.10 J9 3.575 2.0625 4,75 の 5 350 2.625 2.34 3.12 12 0. 28125 0.9 375 dia 766 deep. 238 dia 1.00 deep tapped -28 4.57 T.35 0. 1785 the 3.275 0.75 Soie de
3. Answer the question completely and write down the given, required and formula that had been used. Provide graph and accurate/comple solution. The value are: V- 1 X- 5 W- 7 Y- 6 Z- 8