2. Air flows at the rate of 1.5 m³/s through a horizontal pipe with a gradually reducing cross section as shown in the figure. The two cross-sections of the pipe have diameters of 400 mm and 200 mm. Take the air density as 1.2 kg/m² and assume inviscid incompressible flow. The change in pressure (P2-P1) (in kPa) between sections 1 and 2 is 200 mm Air Flow 400 mm 1.5 m/s (A) -1.28 (B) 2.56 (C) -2.13 (D) 1.28

2. Air flows at the rate of 1.5 m³/s through a horizontal pipe with a gradually reducing cross section as shown in the figure. The two cross-sections of the pipe have diameters of 400 mm and 200 mm. Take the air density as 1.2 kg/m² and assume inviscid incompressible flow. The change in pressure (P2-P1) (in kPa) between sections 1 and 2 is 200 mm Air Flow 400 mm 1.5 m/s (A) -1.28 (B) 2.56 (C) -2.13 (D) 1.28

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The velocity profile of a liquid flows through the z direction of the vertical tube (figure right) with the radius n is given as; 1 dp (r2 – r3) 2µ dz Vz Specify the max imum velocity and derive an expression for the average velocity.
1- A 2 m long conical tube is fixed vertically with its smaller end upwards. It carries liquid in downward direction. The flow velocities at the smaller and larger ends are 5m/s and 2m/s respectively. The 0.35(u₁-u₂)² pressure head at the smaller end is 2.5 m of liquid. If the loss of head in the tube is 2g (u, and u₂ being the velocities at the smaller and larger ends respectively). Calculate the pressure head at the larger end.
Question 2: A fluid with density 1 kg/m' is moving through a pipe with same cross-sectional area at a velocity of 1.2 m/s at pointl and 1.5 m/s at point 2, and point 2 above point 1 in the elevation with 3 cm. If the pressure at the beginning at point lis 116 Pa, what is the pressure of fluid at point 2? What is the mass and volume flow rate at point 2? 2 1
The Water is flowing through a pipe having diameter 350 mm and 210 mm at the bottom and upper end respectively. The intensity of pressure at the bottom end is 25.85 N/cm? and pressure at the upper end is 11.6325 N/cm? & the rate of flow through the pipe is 40 lit/s. Draw a neat diagram and determine the following: 1.Velocity head at bottom of the pipe in m/s. 2. Velocity head at top of the pipe in m/s. 3. The difference in datum head between top & bottom in meter of water - 4. The difference of pressure head between bottom to top end in meter of water.- The velocity of flow of water at the bottom in m/s.
Water flows in a 170 mm diameter pipeline (A) divides into two smaller pipelines, one being 100 mm in diameter (D) and the other being 80 mm in diameter (B). If the velocity in the 80 mm pipe (B) is 0.6m/s and that in the 100 mm pipe (D) is 0.9m/s, calculate the velocity in m/s and the mass flow rate in kg/s in the 170 mm pipe (A.
Air flows at the rate of 1.5m/s through a horizontal pipe with a gradually reducing cross-section as shown in the figure. The two cross-sections of the pipe have diameters of 400mm and 200 mm. Take the air density as 1.2 kg/m³ and assume inviscid incompressible flow. The change in pressure (P2-Pj) (in kPa) between sections 1 and 2 is 200mm ! (1) ↑ Air Flow 400mm (2) 1.5 m³ /s (A) –1.28 (B) 2.56 (C) -2.13 (D) 1.28
Problem (3) Find the rate of change of h(t) (mm/s) if water is the fluid at all locations. Use V₁ = 7.1 m/s and Q = 1000 L/min. m₂ = 10 kg/s 4 cm dia. V₁ Answer: 120 cm h(t) 8
Answer the following questions: a. Air lows past an object and exits as a free jet as shown in the figure. Because of the obstruction, the exit velocity is non-uniform with magnitude of 4 m/s from r = 0 to r=0.5 m and 12 m/s from r = 0.5 m/s to r = 1.0 m. It is initially calculated that the average velocity is 10 m/s, using a differential area, dA=2rrdr, what is the value of the momentum correction factor, B? 2-m-dia. a Air Wake 1-m dia. Exit -4 m/s -12 m/s b. A hydraulic turbine has 85 m of head available at a flow rate of 250 L/s. If the fluid is water and the turbine's overall efficiency is 78%, what is the mechanical power, in kW, it extracts from the water?
4m A 4-meter-diameter cylindrical tank contains oil and water as shown in the figure. At the bottom of the tank is an orifice having a diameter of 0.1 meter with coefficient of contraction and coefficient of velocity equal to 0.62 and 0.98, respectively. Determine the following: 6m Oil, SG = 0.9 a. The rate of flow on the orifice (L/s). b. The time to remove water only at the tank (s). c. The time to drain all the liquids (s). 4m Water
An oil of S.G of 0.8 is flowing in a stream tube as shown in the figure. The discharge through the tube is 0.06 m³/s. The angle at the inlet is 0° and at the outlet is 30°. Determine i. the bend force in x- direction ii. the bend force in y- direction P2=1.3 bar D2=0.2 m Fy P1=2 bar D1=0.4 m S.G=0.8 Q=0.06 m³/s
A cylinder with a mass 0.222 kg is sliding downwards through a vertically positioned pipe. A thin oil layer exists between the cylinder and the pipe's internal surface. Centerline of the cylinder and the pipe overlap. (yoil =8044.2 N /m3 ; voil=6-106 m²/s). Find the change in the speed of cylinder in the pipe with respect to its unit displacement and the shear stress that acts upon the oil layer. A A L = 128 mm V W 73.8 mm 74 mm 0.1 mm Figure 1
The pump is used to transfer fluid from one location to another of different height. At inlet and outlet atmospheric conditions are present. The pipe diameter increases after the pump outlet. Determine all the surviving terms of energy equation after simplification. FUM kinetic energy, potential energy, pipe losses none pipe losses, potential energy, pressure increase pressure increase, pipe losses, potential energy kinetic energy, pressure increase, pipe losses OOO