For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the hydraulic conductivity of the clay for the loading range in m/min. Show free body diagram. a.1.31 x 10^-7 b.1.081 x 10^-3 c.2.56 x 10^-2

For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the hydraulic conductivity of the clay for the loading range in m/min. Show free body diagram. a.1.31 x 10^-7 b.1.081 x 10^-3 c.2.56 x 10^-2

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.11P

See similar textbooks

Similar questions

Subject: Soil Mechanics Please provide a solution and a diagram For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the hydraulic conductivity of the clay for the loading range in m/min. a. 1.081 x 10^-3 b. 2.56 x 10^-2 c. 1.31 x 10^-7 d. 1.23 x10 ^-5
For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the hydraulic conductivity of the clay for the loading range in m/min. Show diagram
For a laboratory consolidation test on a clay specimen (drained both sides), the following were obtained. Thickness of the clay layer = 25mm o_1 = 200KN/m^2 o'2 = 400KN/m^2 e_1 = 0.73 e_2 = 0.61 Time for 50% consolidation (t_50 = 2.8min: From table U = 50%, Tv = 0.197 %3D Determine the hydraulic conductivity (in cm/sec) of the clay for the loading range.
A consolidated-undrained triaxial test was conducted on a saturated, normally consolidated clay. The test results areσ3 = 13 lb/in2σ1(failure) = 32 lb/in2Pore pressure at failure = u = 5.5 lb/in2. Determine c, Φ, c', and Φ'.
The following results were obtained at failure in a series of drained triaxial tests on fully saturated clay specimens originally 38 mm diameter by 76 mm long. All-round pressure (kN/m2) Axial compression (mm) Axial load (N) Pore-water pressure (kN/m2) 200 400 600 7.22 8.36 9.41 480 895 1300 25 75 100 (a) Determine the values of the shear strength parameters c and . (b) Determine the values of the shear strength parameters c and . (c) A different specimen of the same soil is tested in undrained triaxial compression at a cell pressure of 240 kN/m2 and fails when the deviator stress is 160 kN/m2. Calculate the pore water pressure in the specimen at failure.
For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the coefficient of consolidation in m2/m. Show free body diagram a.1.081 x 10^-3 b.1.23 x10 ^-5 c.1.31 x 10^-7 d.2.56 x 10^-2
Question 3 The results of two consolidated-drained test triaxial tests on a clay are given below: Specimen No. Chamber Pressure Deviator Stress 220 400 105 II 210 1. Determine the angle of internal friction. 2. Determine the cohesion of the clay. 3. Determine the normal stress on the point on the failure plane of the 2"d specimen. O Question 1: A. 26.744 O Question 1: B. 26.042 O Question 1: C. 27.871 O Question 1: D. 27.486 O Question 2: A. 10.737 O Question 2: B. 12.141 O Question 2: C. 17.372 O Question 2: D. 14.836 O Question 3: A. 317.694 O Question 3: B. 232.575 O Question 3: C. 230.306 O Question 3: D. 322.194 O O O O O O O CO
A clay sample was consolidated in a triaxial cell under a backpressure of 50 kPa and cell pressure of 150 kPa. The drainage valve was then closed and the cell pressure was increased to 200 kPa when the pore pressure increased to 98 kPa. What is Skempton’s B-parameter? The above sample was then subjected to a vertical deviator stress, which was increased from zero under undrained conditions. The sample failed when the pore water pressure was 160 kPa and the deviator stress was 70 kPa. What is Skempton’s A-parameter at failure? Assuming the clay is normally consolidated, find the friction angle in terms of effective stresses.
The laboratory consolidation test is conducted on a clay sample. The following data results were obtained P1 =55 kPa P2 = 130 kPa e1= 0.95 e2= 0.80 Thickness of the sample of clay= 35mm Time for 50% consolidation = 3.0 min Tv= 0.197 a. Find the coefficient of volume compressibility b. Determine the coefficient of consolidation if a sample of clay was drained on both sides c. Compute the hydraulic conductivity of the clay
4. The construction of a 10m x 10m square water tank in a residential neighbourhood has been planned. As indicated in Figure below, a 6m thick soft clay layer was discovered between sand layers during site exploration. For laboratory studies, an undisturbed soil sample was obtained in the middle of the soft clay layer. The findings of the laboratory consolidation test are listed below. Pressure, o' (kN/m2) | 25 50 100 200 400 800 Void Ratio, e 1.28 1.26 1.22 1.14 1.05 0.95 i. Find the preconsolidation pressure (o'c), Virgin, and Laboratory Compression Index using the information above (Cc). Find the primary consolidation settlements that will occur at the water tank's centre due to compression of the soft clay layer ii. 10 m Load = 18,000 kN Ground Level 1 m Ground water level Dense Sand, y= 20 kN/m³ 2 m Soft Clay Kat = 16 kN/m³ ; eo= 1.38 Cc = graph? ; Cs =Cc; o' = graph? 6 m %3D %3! Very Dense Sand
QI: The following are the results of a laboratory consolidation test on a soil specimen obtained from the field: dry mass of specimen = 128 gm, height of specimen at the beginning of the test = 2.54 cm, Gs = 2.75, and area of the specimen = 30.68 cm². Final height of the specimen at the end of the consolidation (cm) 2.540 2.488 Effective pressure, ở(kN/m?) 50 100 2.465 200 2.431 2.389 2.324 400 800 1600 2.225 2.115 3200 Required: Make necessary calculations and draw an e versus log ở curve.
A consolidated-undrained tri-axial test was conducted on a normally conslidated clay sample and the results are follows: Chamber confining pressure= 119kpa Deviator Stress at failure=90 kpa Pore water pressure= 58kpa These results were used to determine the drained friction angle of the soil. Compute the deviator stress (kpa) at failure when the drained test was conducted with the chamber confining pressure changed to 156 kpa. Use stored value. Answer to 5 decimal places.