he two axes of an x-y positioning table are each driven by a stepping motor connected to a leadscrew with a 10:1 gear reduction. The number of step angles on each stepping motor is 20. Each leadscrew has a pitch = 5.0 mm and provides an axis range = 300.0 mm. There are 16 bits in each binary register used by the controller to store position data for the two axes. What is the control resolution of each axis? What are the required the rotational speeds and corresponding pulse train frequencies of each stepping motor in order to drive the table at 600 mm/min in a straight line from point (25,25) to point (100,150)? Ignore acceleration

he two axes of an x-y positioning table are each driven by a stepping motor connected to a leadscrew with a 10:1 gear reduction. The number of step angles on each stepping motor is 20. Each leadscrew has a pitch = 5.0 mm and provides an axis range = 300.0 mm. There are 16 bits in each binary register used by the controller to store position data for the two axes. What is the control resolution of each axis? What are the required the rotational speeds and corresponding pulse train frequencies of each stepping motor in order to drive the table at 600 mm/min in a straight line from point (25,25) to point (100,150)? Ignore acceleration

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter8: Computer Numerical Control

Section8.1: Cnc Basics

Problem 8RQ: Supposing a programmer, using absolute mode, mistakenly entered Z-3.689, when he or she intended to...

See similar textbooks

Similar questions

Gates are prepared on the cope after removing the pattern from the molding box. Select one: ut of O True O False Jestion -8 Match the following. ed In the classification of manufacturing process, bending is an example of Choose. d out of In the classification of manufacturing process, shaping operation is an Choose. g question example of tion 9 High accuracy and repeatability can not be obtained with CNC systems. 99+ 5 Type here to search 14 10 米 & 2$ 4 6. R Es T D F K V B. N M IS 00 47
The link lengths and the value of 2 and offset for some fourbar crank-slide linkages are defined in Table 1. The linkage configuration and terminology are shown in Figure 1. For the rows assigned, find (a) all possible solutions for angle and slider position d by vector loop method. (b) the transmission angle corresponding to angle 83. (Hint: Treat the vector R4 as virtual rocker) Show your work in details: vector loop, vector equations, solution procedure. Table 1 Row a b с offset 02 Link 2 1.4 3 5 A R2 0₂ Link 3 4 8 20 slider axis. R3 Link 3 R₂ d R₁ Figure 1. 0₁ Offset 1 2 -5 С B R4 T 84 X Q2 45° -30° 225°
For the 3-DOF Industrial manipulator arm as shown in Figure 3, determine the joint displacements for known position and orientation of the end of the arm point. 0. 0. Y1A Y2 A Y3 X2 X3 21 22 23 Yo xo Figure 3. 3 DOF RRR Industrial manipulator arm The link transformation matrices are given by C3 -S3 0 a3C3 S3 C3 1 C2 -S2 0 a,C2 C1 S1 -S1 -C1 d1 S2 C2 2T3 %3D T2 1 1 1 1 1 S1 C\C2a3+C1a2 C1C2C3 – C1S2S3 -C¡C2S3 – C1S2S3 S,C2C3 – S1S2S3 -SĄC2S3 – S1 S2C3 -C1 SịC2a3+ Sja2 Szaz + d1 1 OT3 = = °T, 'T2 ?T3 S½C3 + C2S3 - S2S3 + C2C3
The two axes of an x-y positioning table are each driven by a stepping motor connected to a leadscrew with a 4:1 gear reduction. The number of step angles on each stepping motor is 200 pulse/rev. Each leadscrew has a pitch = 5 mm/rev and provides an axis range 400 mm. What are the required rotational speeds and corresponding pulse train frequencies of each stepping motor in order to drive the table at 600 mm/min in a straight line from point (25,25)mm to point (300,150)mm incremental positioning? Ignore acceleration. =
01:53 M 1 or Vo LTED :4G + Assignment 1_KoM.pdf 1/2 Kinematics of Machine Assignment 1 1. Describe various inversions of a single slider crank mechanism giving examples. 2. Describe the inversions of double slider crank mechanism with examples. 3. Define mechanical advantage and transmission angle of a mechanism. 4. For the kinematic linkage shown in fig. 1, find the number of binary link, ternary link, quaternary link and degree of freedom. C (1) DE, F Fig. 1(a) Fig. 1(b) 5. What do you mean by degree of freedom of a kinematic pair? How are pair classified? Give suitable examples. 6. In a slider crank mechanism, the length of crank and connecting rod are 100 mm and 400 mm respectively. Locate all the l-centres of the mechanism for the position of the crank when it has turned 45° from the inner dead centre. Find the velocity of slider and point B. 400 mm 45° m mim Fig.2 7. State and prove Kennedy's theorem as applicable to instantaneous centre of rotation. Explain angular velocity…
Evaluate the 3-DOF wrist as shown in Figure 2, use the conventional method to determine 1. Linear velocity and 2. Angular velocity NOTE: for JOINT 3 ( 03 ) only Connected to robot arm Pitch Roll Yaw Figure 2: Wrist assembly The known position and orientation of the end of the arm point is. C, C2 [-C,S2C3 + S¼S3 -S;S2C3 – C1S3 C2C3 C¡S2S3 + S1C3 S4S2S3 + C,C3 -C2S3 01 S,C2 S2 1 °T3=°T¡'T2²T3
Problem 3: The RPH robot of Figure 3 is shown in its zero position. Determine the end- effector zero position configuration M, and the screw axes S; in {s}. n. F -inta. Sorowo- Zs {s} Xs L₁ ŷs Lo 0₁5 L2 02 {b} zb 103 pitch h = 0.1 m/rad Ấb ŷb L3 Figure 3: An RPH open chain shown at its zero position. All arrows along/about the joint axes are drawn in the positive direction (i.e., in the direction of increasing joint value). The pitch of the screw joint is 0.1 m/rad, i.e., it advances linearly by 0.1 m for every radian rotated. The link lengths are Lo = 4, L₁= 3, L2= 2, and L3= 1 (figure not drawn to scale).
4. Please explain the difference between Modal and Non-modal Codes. Think about which G-code can be omitted in the following NC program and sign such G-code with bracket. 00001 N10 G20 G40 G49 G54 G80 G90 N20 M06 T03 N30 G43 H03 N40 M03 S2000 N50 G00 X0.5 Y0.5 N60 G00 Z0.2 N70 G01 Z-0.1 F5.0 N80 G01 X0.5 Y1.5 F10 N90 G01 X0.5 Y1.5
The two axes of an x-y positioning table are each driven by a stepping motor connected to a leadscrew with a 10:1 gear reduction. The step angle on each stepping motor is 7.5°. Each leadscrew has a pitch = 5 mm/rev and provides an axis range = 300 mm. What are the required rotational speeds and corresponding pulse train frequencies of each stepping motor in order to drive the table at 600 mm/min in a straight line from point (25, 25)mm to point (100, 150)mm incremental positioning? Ignore acceleration.
Calculate the mobility of the kinematic chain please
Supposing a programmer, using absolute mode, mistakenly entered Z-3.689, when he or she intended to enter Z3.689. Describe what would happen, and how far the actual position would be from the intended position.
All pertinent rigid dimensions are specified for the linkage shown. Note that the ground pivot for the input link is at the origin of the coordinate system. The input angle []in is currently 170° measured from the x axis as shown. The figure is not exactly to scale, but it is reasonably close for checking purposes. (a) Calculate the value of the angle []out as shown on the figure. Use the equations developed from the loop closure method. Note that you will need to incorporate a change of coordinate axes orientation to the axes defined for the loop closure equations. (b) Calculate the absolute location of point P with respect to the coordinate axes shown. 18 30° 9° 9 P 20 50° -170° X