Irwin Textile Mills produces two types of cotton cloth—denim and corduroy. Corduroy is a heavier grade of cotton cloth and, as such, requires 7.5 pounds of raw cotton per yard, whereas denim requires 5 pounds of raw cotton per yard. A yard of corduroy requires 3.2 hours of processing time; a yard of denim requires 3.0 hours. Although the demand for denim is practically unlimited, the maximum demand for corduroy is 510 yards per month. The manufacturer has 5,500 pounds of cotton and 3,000 hours of processing time available each month. The manufacturer makes a profit of $2.25 per yard of denim and $3.10 per yard of corduroy. The manufacturer wants to know how many yards of each type of cloth to produce to maximize profit. Due to the market change, the demand for corduroy has increased to 600 yards per month. How would this affect Irwin Textile Mills' profits? Question 2 options: Cannot decide. Profits would decrease. Profits would remain the same. Profits would increase.

Irwin Textile Mills produces two types of cotton cloth—denim and corduroy. Corduroy is a heavier grade of cotton cloth and, as such, requires 7.5 pounds of raw cotton per yard, whereas denim requires 5 pounds of raw cotton per yard. A yard of corduroy requires 3.2 hours of processing time; a yard of denim requires 3.0 hours. Although the demand for denim is practically unlimited, the maximum demand for corduroy is 510 yards per month. The manufacturer has 5,500 pounds of cotton and 3,000 hours of processing time available each month. The manufacturer makes a profit of $2.25 per yard of denim and $3.10 per yard of corduroy. The manufacturer wants to know how many yards of each type of cloth to produce to maximize profit. Due to the market change, the demand for corduroy has increased to 600 yards per month. How would this affect Irwin Textile Mills' profits? Question 2 options: Cannot decide. Profits would decrease. Profits would remain the same. Profits would increase.

Practical Management Science

6th Edition

ISBN:9781337406659

Author:WINSTON, Wayne L.

Publisher:WINSTON, Wayne L.

Chapter2: Introduction To Spreadsheet Modeling

Section: Chapter Questions

Problem 33P: Assume the demand for a companys drug Wozac during the current year is 50,000, and assume demand...

See similar textbooks

Similar questions

Assume the demand for a companys drug Wozac during the current year is 50,000, and assume demand will grow at 5% a year. If the company builds a plant that can produce x units of Wozac per year, it will cost 16x. Each unit of Wozac is sold for 3. Each unit of Wozac produced incurs a variable production cost of 0.20. It costs 0.40 per year to operate a unit of capacity. Determine how large a Wozac plant the company should build to maximize its expected profit over the next 10 years.
In a large microelectronics plant, the assembly cell for circuit boards has a demand for 250 units an hour. Two feeder cells supply parts A and B to the assembly cell (one A and one B for each board). Standard containers that look like divided trays are used. A container will hold 24 As or 10 Bs. It takes 10 minutes to fill up a container with As and 24 minutes to fill up a container with Bs. Transit time to the assembly cell is 5 minutes for both A and B. No safety factor is used. Set up a kanban control system for the assembly process.
The Petoskey Potato Chip Company produces 3 varieties of gourmet potato chip. The varieties and average daily demand are given below: Bar-B-Que: 325 cases/day Sour Cream & Onion: 215 cases/day Classic Cut: 360 ases/day The company runs 24 hours/day and can produce 1,300 cases of potato chips per day. Each case of potato chip costs $20 to produce and Petoskey assumes 18% of this cost as the annual holding cost. It takes Petoskey 5 hours to setup for production of a different variety at a cost of $715. Calculate the minimum cost cycle time in days. Answer: 25.2 How is this calculated?
Western Chassis produces high-quality polished steel and aluminum sheeting and two lines of industrial chassis for the rack mounting of Internet routers, modems, and other telecommunications equipment. The contribution margin (contribution toward profit) for steel sheeting is $0.40 per pound and for aluminum sheeting is $0.60 per pound. Western earns $12 contribution on the sale of a Standard chassis rack and $15 contribution on a Deluxe chassis rack. During the next production cycle, Western can buy and use up to 25,800 pounds of raw unfinished steel either in sheeting or in chassis. Similarly, 20,400 pounds of aluminum are available. One standard chassis rack requires 16 pounds of steel and 8 pounds of aluminum. A Deluxe chassis rack requires 12 pounds of each metal. The output of metal sheeting is restricted only by the capacity of the polisher. For the next production cycle, the polisher can handle any mix of the two metals up to 4,000 pounds of metal sheeting. Chassis manufacture…
Western Chassis produces high-quality polished steel and aluminum sheeting and two lines ofindustrial chassis for the rack mounting of Internet routers, modems, and other telecommunicationsequipment. The contribution margin (contribution toward profit) for steel sheeting is $0.40 per poundand for aluminum sheeting is $0.60 per pound. Western earns $12 contribution on the sale of aStandard chassis rack and $15 contribution on a Deluxe chassis rack. During the next productioncycle, Western can buy and use up to 25,800 pounds of raw unfinished steel either in sheeting or inchassis. Similarly, 20,400 pounds of aluminum are available. One standard chassis rack requires 16pounds of steel and 8 pounds of aluminum. A Deluxe chassis rack requires 12 pounds of each metal.The output of metal sheeting is restricted only by the capacity of the polisher. For the next productioncycle, the polisher can handle any mix of the two metals up to 4,000 pounds of metal sheeting. Chassismanufacture can be…
The MFA Co. Ltd. presently moves pallet loads of cans from production to the truck dock for loading. The loading dock foreman claims that due to increased production the company needs to purchase five new fork trucks and to hire five persons to operate these trucks. Using the present equipment (fork trucks) the maximum load of cans that can be transported is 1500 lb. at a 13.5” load center. The fork truck currently in use is manufacturer - rated for 3,000 lb. at the 24” load center. Question: Can the pallet load capacity be increased? What, if any, new equipment is required?
My School Notebook Company produces custom 3-ring binders with school logos for high schools in the Midwest. They mold binders in four standard colors and then imprint the school’s logo on a to-order basis. The average daily demand for the base color notebooks is as follows: Green: 470 notebooks/day Blue: 200 notebooks/day Red: 280 notebooks/day Black: 330notebooks/day MySchool can produce 1,760 notebooks per 24-hour day. It takes 8 hours to setup production for another color. Calculate the minimum production cycle time in days.
Plainwell Polymers is going to producing the main dashboard structure for a new car design. The dashboard will be produced in three colors with expected daily demand as follows: Black: 365 units/day Grey: 110 units/day Tan: 210 units/day The injection-molding machine can produce a total of 1,090 parts per day running 24 hours per day. It costs Plainwell $1,040 to set up each color for producition and the daily holding cost for each part is $0.49. What is the length of the lowest cost cyclic schedule (ignoring setup time constraints) in days?
ABC Apple Juice Company produces and markets fresh fruit juice. During the apple harvest season, trucks bring apples from the fields to the process plant during a workday that runs long hours from 7AM. On peak days, approximately 3,000 kg of apples are trucked in per hour. Trucks dump their contents in a holding bin with a storage capacity of 9,000 kg. When the bin is full, incoming trucks must wait until it has sufficient available space. A conveyor moves apples from bin to the processing plant. The plant is configured to process apples at the rate of 2,000 kg per hour. Trucks arrive uniformly between 7:00AM to 5:00PM. Each truck holds about 1,000 kg of apples. The truck drivers are paid at the rate of $10 per hour. As ABC makes fresh juice, it does not store apples. Processing plant starts at 10:00AM and ends when all the apples received during the day have been processed. It takes 2 hours to clean the empty plant that must be kept ready for the next day production. Trucks are owned…
A brewery produces regular beer and a lower-carbohydrate "light" beer. Steady customers of the brewery buy 12 units of regular beer and 18 units of light beer monthly. While setting up the brewery to produce the beers, the management decides to produce extra beer, beyond that needed to satisfy customers. The cost per unit of regular beer is $32,000 and the cost per unit of light beer is $60,000. Every unit of reqular beer brings in $100,000 in revenue, while every unit of light beer brings in $300,000 in revenue. The brewery needs at least $9,000,000 in revenue, and has determined that the total demand will be at least 50 units of beer. Complete parts (a) and (b). (a) How much of each type of beer should be made so as to minimize total production costs? 30 units of regular beer and 20 units of light beer should be made, for a minimum total cost of $ 2160000 (Type integers or decimals.) (b) Suppose the minimum revenue is increased to $9,400,000. Use shadow costs to calculate the total…
A car wash offers two different types of wash services, deluxe wash and standard wash. The deluxe wash require(s) three steps: pre-wash, wash and dry. The standard wash only require(s) two steps: wash and dry. The pre-wash step has a capacity of 7 cars per hour. The wash step has a capacity of 11 cars per hour. The dry step has a capacity of 10 cars per hour. The demand for deluxe wash is 7 cars per hour and the demand for standard wash is 11 cars per hour. Instruction: Round to the nearest integer percentage. What is the implied utilization of the bottleneck resource?
Suppose we schedule shipments to our customers so that we expect each shipment to wait for two days in finished goods inventory (in essence we add two days to when we expect to be able to ship). We do this as protection against system variability to ensure a high on-time delivery service. If we ship approximately 2,000 units each day, how many units do we expect to have in finished goods inventory after allowing this extra time? If the items are valued at $4.50 each, what is the expected value of this inventory?