Leach Finishing makes various metal fittings for the construction industry. Three of the fittings, models X-12, X-24, and X-30, require grinding on a patented machine of which Leach has only one. The cost of production information for the three products follow: X-12 $ 35 $ 20 18.0 X-24 $51 $ 27 12.5 X-30 Price per fitting Variable cost per fitting Units per hour of grinding The testing machine used for both models has a capacity of 3,230 hours annually. Fixed manufacturing costs are $496,000 annually. $70 $44 10.0 Required: a. Suppose that Leach Finishing can sell at most 59,200 units of any one fitting. How many units of each fitting model should Leach Finishing produce annually? b. Suppose that Leach Finishing can sell at most 18,000 units of any one fitting. How many units of each fitting should Leach Finishing produce annually?

Leach Finishing makes various metal fittings for the construction industry. Three of the fittings, models X-12, X-24, and X-30, require grinding on a patented machine of which Leach has only one. The cost of production information for the three products follow: X-12 $ 35 $ 20 18.0 X-24 $51 $ 27 12.5 X-30 Price per fitting Variable cost per fitting Units per hour of grinding The testing machine used for both models has a capacity of 3,230 hours annually. Fixed manufacturing costs are $496,000 annually. $70 $44 10.0 Required: a. Suppose that Leach Finishing can sell at most 59,200 units of any one fitting. How many units of each fitting model should Leach Finishing produce annually? b. Suppose that Leach Finishing can sell at most 18,000 units of any one fitting. How many units of each fitting should Leach Finishing produce annually?

Intermediate Accounting: Reporting And Analysis

3rd Edition

ISBN:9781337788281

Author:James M. Wahlen, Jefferson P. Jones, Donald Pagach

Publisher:James M. Wahlen, Jefferson P. Jones, Donald Pagach

Chapter10: Property, Plant And Equipment: Acquisition And Subsequent Investments

Section: Chapter Questions

Problem 7P: Self-Construction Olson Machine Company manufactures small and large milling machines. Selling...

See similar textbooks

Similar questions

Self-Construction Olson Machine Company manufactures small and large milling machines. Selling prices of these machines range from 35,000 to 200,000. During the 5-month period from August 1, 2019, through December 31, 2019, Olson manufactured a milling machine for its own use. This machine was built as part of the regular production activities. The project required a large amount of time front planning and supervisory personnel, as well as that of some of the companys officers, because it was a more sophisticated type of machine than the regular production models. Throughout the 5-month period, Olson charged all costs directly associated with the construction of the machine to a special account entitled Asset Construction Account. An analysis of the charges to this account as of December 31, 2019, follows: Olson allocates factory overhead to normal production as a percent of direct labor dollars as follows: Olson uses a flat rate of 40% of direct labor dollars to allocate general and administrative overhead. During the machine testing period, a cutter head malfunctioned and did extensive damage to the machine table and one cutter housing. This damage was not anticipated and was the result of an error in the assembly operation. Although no additional raw materials were needed to make the machine operational after the accident, the following labor for rework was required: Olson has included all these labor charges in the asset construction account. In addition, it included in the account the repairs and maintenance charges of 1,340 that it incurred as a result of the malfunction. Required: 1. Compute, consistent with GAAP and common practice, the amount that Olson should capitalize for the milling machine as of December 31, 2019, when it declares the machine operational. 2. Next Level Identify the costs you included in Requirement 1 for which there are acceptable alternative procedures. Describe the alternative procedure(s) in each case.
Leach Finishing makes various metal fittings for the construction industry. Three of the fittings, models X-12, X-24, and X-30, require grinding on a patented machine of which Leach has only one. The cost of production information for the three products follow: X-12 Price per fitting Variable cost per fitting Units per hour of grinding The testing machine used for both models has a capacity of 2,870 hours annually. Fixed manufacturing costs are $484,000 annually. Required A Required B X-24 $29 $ 14 18.0 X-12 X-24 X-30 units units units $ 45 X-30 $21 12.5 Required: a. Suppose that Leach Finishing can sell at most 55,600 units of any one fitting. How many units of each fitting model should Leach Finishing produce annually? b. Suppose that Leach Finishing can sell at most 15,300 units of any one fitting. How many units of each fitting should Leach Finishing produce annually? 15 Complete this question by entering your answers in the tabs below. $ 64 $38 10.0 Suppose that Leach Finishing…
U-RIDE, Inc. currently produces the electric engines that are used in golf carts made and sold by the Company. Electco has offered to sell the electric engines to U-RIDE at a price of $207 each. Current production information follows: Unit-level material and labor $ 180 Facility-level depreciation of manufacturing equip. $ 5,100 /month Product-level engine production supervisor's salary $ 2,100 /month Annual facility-level utilities $ 15,500 U-RIDE is currently operating profitably producing and selling 2,100 engines a year using 80% of its manufacturing capacity. Which of the following is true? Multiple Choice U-RIDE should make the engines for cost savings of $27 per unit. Buying the units would increase U-RIDE's cost by $15 per unit. U-RIDE has avoidable costs of greater than $207 per unit and should therefore buy the engines. Buying the units would increase profitability by $42 per unit.
Howell Corporaon produces an execuve jet for which it currently manufactures a fuel valve; the cost ofthe valve is indicated below:Cost per UnitVariable costsDirect material $900Direct labor 600Variable overhead 300Fixed costsDepreciaon of equipment 500Depreciaon of building 200Supervisory salaries 300The company has an offer from Duvall Valves to produce the part for $2,000 per unit and supply 1,000 valves(the number needed in the coming year). If the company accepts this offer and shuts down producon ofvalves, producon workers and supervisors will be reassigned to other areas. The equipment cannot be usedelsewhere in the company, and it has no market value. However, the space occupied by the producon of thevalve can be used by another producon group that is currently leasing space for $55,000 per year.What is the incremental savings of buying the valves? (The answer should be stated in a per‐unit format and is a positive number)
Imovating Motors Company makes electric cars and has two products, the iHybrid and the iBrilliant. To produce the iHybrid, Imovating Motors employed assets of $10,500,000 at the beginning of 2017 and $14,450,000 of assets at the end of 2017. Other costs to mamufacture the Hybrid include the following Direct materials $5,000 per unit $1,500 per setup-hour $ 415 per machine-hour Setup Production General administration and selling costs for Sinmplegreen total $7,820,000 in 2017. During the year, Innovating Motors produced 11,000 Hybrid cars using 6,000 setup-hours and 139.000 machine-hours. It sold these cars for $12.000 each. Required: i Assuming that Innovating Motors defines investment as avenge assets durinz the period what is the retum on investment for the Hybrid division? Calculate the residual income for iHybrid if Innovating Motors has a required rate of retum of 16% on investments. Based on its values and strategic thrusts, Innovating Motors is committed to sustainable…
Beat Company manufactures 8,000 units of a certain component per year. This component is used in the production of the main product. The following are the costs to make the component per unit: Direct materials $4 Direct labor $4 Variable overhead $3 Fixed overhead $5 If Beat Company buys the component from an outside supplier, the company can rent out the released facilities for P12,360 a year. The cost of the component per unit as quoted by the supplier is P15. 25% of fixed overhead applied in the manufacture of the component will continue regardless of what decision is made. For all purchase made by the company, freight and handling costs are applied at 2% of the purchase price. The direct materials cost presented above is exclusive of such freight and handling cost. What is the advantage or disadvantage of buying the component?A. P12,240 advantage B. 24,600 advantage C. 5,400 disadvantage D. 8,600 advantage
Fancy Lighting Company makes 4,000 units per year of a part it uses in the luxury lighting products it manufactures. The unit product cost of this part is computed as follows: Direct materials $ 11.90 Direct labor 19.50 Variable manufacturing overhead 1.70 Fixed manufacturing overhead 9.60 Unit product cost $ 42.70 An outside supplier has offered to sell the company all of these parts it needs for $41.00 a unit. If the company accepts this offer, the facilities now being used to make the part could be used to make more units of a lighting product that is in high demand. The additional contribution margin on this other lighting product would be $32,000 per year. If the part were purchased from the outside supplier, all of the direct labor cost of the part would be avoided. However, $ 6.50 of the fixed manufacturing overhead cost being applied to the part would continue even if the part were purchased from the outside supplier. This fixed manufacturing overhead cost would be applied to…
Specter Company makes 20,000 units per year of a part it uses in the products it manufactures.The unit product cost of this part is computed as follows:Direct materials $25.10Direct labour 18.20Variable manufacturing overhead 2.40Fixed manufacturing overhead 13.40Unit product cost $56.70An outside supplier has offered to sell the company all these parts it needs for $56.00 a unit. Ifthe company accepts this offer, the facilities now being used to make the part could be used tomake more units of a product that is in high demand. The additional contribution margin on thisother product would be $50,000 per year.If the part were purchased from the outside supplier, all the direct labour cost of the part wouldbe avoided. However, $5.10 of the fixed manufacturing overhead cost being applied to the partwould continue even if the part were purchased from the outside supplier. This fixedmanufacturing overhead cost would be applied to the company's remaining products.Required:Part a:Calculate…
Abolt Corporation makes 40,000 units per year of a part it uses in the products it manufactures. The unit product cost of this part is computed as follows: direct materials $11.30 direct labour $22.70 variable manufacturing overhead $1.20 fixed manufacturing overhead $24.70 unit product cost $59.90 An outside supplier has offered to sell the company all of these parts it needs for$46.20 a unit. If the company accepts this offer, the facilities now being used tomake the part could be used to make more units of a product that is in highdemand. The additional contribution margin on this other product would be$264,000 per year. Additionally, $21.90 of the fixed manufacturing overheadcost being applied to the part would continue even if the part were purchasedfrom the outside supplier.Required:I. What is the net total dollar advantage (disadvantage) of purchasing the partrather than making it?II. Calculate the maximum amount per unit the company should be willing topay an…
Bramble Company manufactures widgets. Blossom Company has approached Bramble with a proposal to sell the company widgets at a price of $60500 for 100,000 units. Bramble is currently making these components in its own factory. The following costs are associated with this part of the process when 100,000 units are produced: Direct material $22700 Direct labour 23000 Manufacturing overhead 29000 Total $74700 The manufacturing overhead consists of $12300 of costs that will be eliminated if the components are no longer produced by Bramble. From Bramble’s point of view, how much is the incremental cost or savings if the widgets are bought instead of made? $14200 incremental savings $2500 incremental savings $2500 incremental cost $14200 incremental cost
In its production process, Purple Tree Inc uses a specialized part in the manufacturing of their fancy widget. The costs to make a part are: direct material, $15; direct labor, $27; variable overhead, $15; and applied fixed overhead, $32. Purple Tree has received a quote of $60 from a potential supplier for this part. If Purple Tree buys the part, 75 percent of the applied fixed overhead would continue. They need 12,000 units of the specialized part. Purple Tree Company would be better off by Group of answer choices $60,000 to buy the part. $348,000 to buy the part. $30,000 to manufacture the part. $216,000 to manufacture the part.
Genent's Engine Company manufactures part TE456 used in several of its engine models. Monthly production costs for 1,000 units are as follows: Direct materials $46,000 Direct labor 11,500 Variable overhead costs 34,500 Fixed overhead costs 23,000 Total costs $115,000 It is estimated that 8% of the fixed overhead costs assigned to TE456 will no longer be incurred if the company purchases TE456 from the outside supplier. Genent's Engine Company has the option of purchasing the part from an outside supplier at $97.75 per unit. The maximum price per unit (TE456 part) that Genent's Engine Company should be willing to pay the…